Description
ES210 STANDARD, ES210EH SLOTTED
1-5/8" x 1-5/8"14 Gauge
Part No: ES210 Weight: 142lbs /100 Ft.
Part No: ES210EH Weight: 137lbs /100 Ft.
Order by: Part Number, Finish, Length
Material: ASTM A-653 LOW CARBON STEEL
Finish:
PL - Plain
PG90 - Pre-Galvanized Grade 90
PG60 - Pre-Galvanized Grade 60
HG - Hot Dipped Galvanized
Length (feet) : 10'& 20'
TDS:
NR - Not Recommended.
This load table is based on a solid channel section.
For concentrated load at center of span, divide uniform load by 2 and
multiply corresponding deflection by 0.8.
Loads include weight of channel, which must be deducted.
Loads must be multiplied by the applicable unbraced factor located in
the blue column in the chart above.
For Pierced Channels, reduce beam load values as follows:
ES210EH 15%
** KL r>200
Column loads are for allowable axial loads and must be reduced for
eccentric loading.
are used.
Pull Out Strength: 1,400 lbs. per bolt when 1/2" ES NS channel nuts
are used.
All specifications subject to change without notice.
© Copyright 2020 eSTRUT® an EMCO Electric International Company Brand.
All Rights Reserved.